This type of sign is the first point of contact on approaching or entering a CUNYfacility. They may be employed for exterior or interior applications as possible or necessary. The most useful type is wall-mounted.
The full CUNYLogotype is advised.
Layout protocols follow those specified for print. The typeface employed is Trade Gothic Next Bold Condensed or Trade Gothic Next Bold.
Building Signage
The office or location description is spelled out in upper and lower case letters aligned left with the type in the logo above. The descriptions may be on one, two, or three lines, but should match the size of the CUNYletters within the Logo Lockup. See 1-line, 2-line and 3-line examples below.
Most architectural signs are custom made to fit the environment and for distance visibility. They are expensive and should be used selectively. Three dimensional logos and letters may also be used in certain priority locations. These signs may also be internally or front illuminated.
Sizes, shapes and materials vary as required, but should always be of high quality.

The descriptions on 3-line

The descriptions on 2-line

The descriptions on 1-line
Internal Signage
This type of sign should be used in areas where visitors and staff are faced with a multiplicity of choices, a confusing layout or large spaces. They may be placed at entry, in elevator lobbies or at key decision points in the wayfinding sequence.

Directional
The department name should align left with the CUNYLogotype. Department names appear in upper and lower case, while specific rooms are set in a smaller size in all caps.
College directional and information signs may also use the CUNYlogo to advantage.
This type of sign will generally be fabricated of vinyl lettering on a rigid metal or plastic substrate.
Mounting height is 60″ to the center of the sign.

Room ID and Numbers
The CUNYLogo lockup has been employed to reinforce CUNYbranding within offices and facilities. Illustrated at right are examples that also employs ADA-mandated Grade Two Braille.
Note: The Logo lockup may be presented in Pantone Cool Gray 5 in situations where a more subtle presentation is needed.
Entrance Treatment

Application on Glass
Entrances are an opportunity to brand the transition from public space into CUNYspace. They are also subject to industrial codes that require “distraction markings� to prevent accidents from pedestrian collisions.
Vinyl application
Entry door ID is the CUNYLogo lockup in 3M ‘Dusted Crystal’ reverse-applied vinyl, giving a sand-blasted appearance. The size may be scaled to fit the available space, but the standard will be 10″ square. The logo is centered left/right on the door or doors and the height is 60″ to the center.
Safety distraction markings
To be used in cases where clear transparent glass panels and sidelights are wider than 20″ in width and an opaque base is lower than 18″. Horizontal bars, benches, planters and other objects blocking the sidelights exempt the panels from this requirement.
The markings are 2″ square, spaced 3″ apart and should be applied at two heights, 30-36″ and 60-66″ high above floor level.
Lobby/Reception Areas

Wall Placement
CUNYsigns are used to identify and brand these first points of contact within CUNYfacilities. Consistent use of the logo helps
build our brand despite extensive variations in interior environments.
The signs should be either centered behind the desk, or mounted on a wall with good sight lines from the entrance or the seating area. Neutral backgrounds are preferred.
The signs are best positioned at eye level (5’6″ high to the center) depending on size of space, ceiling height and local conditions.
Co-branding


College Interior Signage
The CUNYname or Lockup can be utilized with its schools and colleges in a number of ways. Most important is the first point of contact in reception or security areas.
The signs should be either centered behind the desk, or mounted on a wall with good sight lines from the entrance or the seating area. Neutral backgrounds are preferred.
The signs are best positioned at eye level (5’6″ high to the center) depending on size of space, ceiling height and local conditions.


College Exterior Signage
Exterior building signs are appropriate opportunities for colleges to express the link to ³Ô¹ÏÊÓÆµ.
Either the full Logotype or the Logo Lockup may be used. The CUNYlogo Lockup should align with some graphic element and should adhere to the other guidelines regarding placement and size.
Sizes, shapes and materials vary as required, but should always be of high quality for a degree of permanence.
College Identity Integration



Signage System
When creating signage lockups the CUNYlogo can be used for a clean, balanced co-branded logo lockup.
Whenever possible and appropriate lead with the CUNYlogo as a masterbrand approach.
Do not include the University name in any of the signature system lockups.
If the college logo is locked up to a component school or department, the CUNYlogo should be used elsewhere in the communication and not locked up with the school sub-brand.